lmeTTest-DONG GUAN LMET TEST TECHNOLOGY CO.,LTD

Home > Product > Weathering Tester

Water Proof Test Chamber

Water Proof Test Chamber
  1. DESCRIPTION & SPECIFICATION

WATER PROOF TEST CHAMBER

GENERAL INTRODUCTION

■ Aim to use this water-proof tester to verify enclosure performance of electrical and electronic products and protection for components and parts inside of those products;

■ Introduced with full intelligent control system as well as frequency-variant technologies to control rotary angle of test specimen rack, swing angle of water-spray swing lever as well as water-spray swing frequency;

■ Use scientific test design that enables this water-proof tester to provide water-drop, water-spray, water-jet as well as other weathering environment;

■ More than 1000 holes are made and distributed in uniform in the top plate that ensures the water drop in ideal distribution for water-proof test;

■ Distance at 200mm between test specimen and test chamber with test chamber made of stainless steel as well as visible glass window for real-time test viewing;

■ Control system is designed with independent-developed touch panel with PLC & stepping motor, flow meter and pressure valve;

■ The water sprayer is made of stainless steel and distributed on the bottom of tester to implement line spray. Magnetic valve is introduced to control water drop loop. water spray flow as well as water drop flow can be indicated through relevant meters.

TECHNICAL PARAMETERS

Test ChamberWater-Proof Test Chamber 
Tester ModelLT-LY-IP1/2 
Internal Dimension (D×W×H1000×1000×1000 mm
Test Table Rotary Velocity 1 ~10 RPM
Rotary Table Diameter400mm
Rotary Table ControlTile Angle: 15°
Height: 200mm 
Water Spray Radius R 400mm
Water Spray Pipe Swing Range90°120° 270° 300° (avaialble to set)
Pipe Diameter16 mm
Water Spray Hole Diameter φ0.4 mm
Spray Hole-Hole Distance 50 mm 
Single Hole Water Flow 0.07 L/min +5%
Water Spray Pressure 80-150 Kpa 
Swing Frequency ControlStepping Motor Control 
Rain Fall Quantity 1.75L/min
Rain Test Temperature20-30
Rain Fall Quantity Analysis AccuracyLess Than 10% 
Test ModeContinuous Test Mode within 10 Days 
Swing Pipe Swing Rate 15 Cycles/min.(IP3), 10 Cycles/Min.(IP4)
Water Drop Device IP21Water-Drop Hole 0.5mm, Hole Distance at 20×20mm;
Water-Drop Height: Approx. 600mm, Water Tank: 500×500 mm
Test Cycle Setting 1-999,999min (Controllable)
Water-Spray Pressure80~100Kpa (Controllable)


DONG GUAN LMET TEST TECHNOLOGY CO.,LTD