lmeTTest-DONG GUAN LMET TEST TECHNOLOGY CO.,LTD

Home > Product > Wire Harness Tester

Cable Flexing Tester

Cable Flexing Tester
  1. DESCRIPTION & SPECIFICATION

CABLE FLEXING TESTER

GENERAL INTRODUCTION

Applied for manufacturer, Research Institution, Quality Check Department to Implement Cable Flexing Test

Compliance with GJB-1916 Standard Requirement

Test Principle: Place and Fix cable on fixture or holder. The fixture or holder swing right and left until no power conductivity after certain test cycle, flexing tester will shutdown automatically and swing cycle can be indexed. 

TECHNICAL PARAMETERS

Tester NameCable Flexing Tester 
Tester ModelLT-8634C
Test Velocity540 cycle/min. controllable with LED display
Test Cycle Setting0999999 cycle (available to pre-set)
Bending Angle180°±10° (90° for left &right)
Wire Diameter130mm ( Full-Custom Available)
Test Station1 Group
Weight1,2,3,4,5,6 kg/each (Total 21kg)
Power Source AC 220V, 50Hz ±10%
Overall Dimension700×600x1050mm


DONG GUAN LMET TEST TECHNOLOGY CO.,LTD