lmeTTest-DONG GUAN LMET TEST TECHNOLOGY CO.,LTD

Home > Product > Compression Tester

Micro-Computer Edge-Ring Crush Tester

Micro-Computer Edge-Ring Crush Tester
  1. DESCRIPTION & SPECIFICATION

MICRO-COMPUTER EDGE-RING CRUSH TESTER

GENERAL INTRODUCTION

Multi-functional Ring/Edge Crush Testing machine is designed and introduced for a comprehensive testing for packaging material such as Corrugating paperboard though a multiple-paper quality test that should mentioned as 

RCT            (Ring Crush Test)

ECT            (Edge Crush Test) 

PAT            (Ply Adhesion Test)

FCT           (Flat Crush Test)

CMT          (Concora Medium Test)

Complies with standard requirement from TAPPI-T472,JIS-P8126,GB/T2679.9 etc.

TEST PRINCIPLE

Place Testing specimen holder with testing specimen loaded between two round plates of tester and apply force with certain velocity, the bottom round plate move upward to apply compression force to testing specimen while the load cell of top round plate detects compression force and transfer the compression data into signal and send the monitor of tester, the monitor finally displays the testing force data. 

TECHNICAL PARAMETERS

Tester NameMicro-Computer Edge-Ring Crush Tester
Tester ModelLT-F-200A 
Overall DimensionL430×W400×H600 mm
Gross Weight40kg
Test Capacity 200kg
Unit Convert KG/N/Lb
Resolution1/10,000
Accuracy±1%
Compression Plate Size 100×100 mm (Available to customize based on diameter of specimens
Compression Space80 mm
Compression Plate Parallelism Error±0.05 mm
Ring Crush Testing Specimen Size152 × 12.7 mm
Edge Crush Testing Specimen Size100 × 25 mm
Testing Velocity12.7 mm/min
Power Consumption 1/8 HP 
Power SourceAC 220V, 50/60Hz, Single Phase,1.5A 

RING CRUSH TESTING SAMPLER

1449311859980698.jpgTOOL APPLICATION

This Ring Sampling Too is applicable to sample Ring Crush Test (RCT) and Other Testing Specimens to Cooperate with relevant tools to ensure edge in same level. 

TECHNICAL PARAMETERS

Tool NameRing Crush Testing Sampler 
ModelLT-200A-1 
Sampling Specimen152 X 12.7mm  
Overall DimensionW670×D450×h470 mm
Gross Weight15KG

EDGE CRUSH TESTING SAMPLER

TOOL APPLICATION35-36(3).jpg

This Sampler can cut and shear the sample in parallel from test specimens. Degree scale on the sampler is available to set the parallel interval.

TECHNICAL PARAMETERS

Tool NameEdge Crush Testing Sampler 
ModelLT-200A-2 
Adjustable Pitch25,30,50,60,80,100,150,175mm
Cutting DepthBelow 8 mm
Stable Edge Sampling Size100 X 25 mm
Overall DimensionW500×D450×H160 mm
Gross Weight15 KG



DONG GUAN LMET TEST TECHNOLOGY CO.,LTD