lmeTTest-DONG GUAN LMET TEST TECHNOLOGY CO.,LTD

Home > Product > Metallographic Tester

Metallographic Mounting Machine

Metallographic Mounting Machine
  1. DESCRIPTION & SPECIFICATION

METALLOGRAPHIC MOUNTING MACHINE

1.Model: LT-XQ-2B

GENERAL INTRODUCTION LD-XQ-2B.jpg

This Metallographic Mounting Machine is designed as mechanical mounting style, which is widely applied for odd-shape, small-size metallographic specimen to implement thermosetting mounting. 

TECHNICAL PARAMETERS 

Machine Name Metallographic Mounting Machine 
Machine ModelLT-XQ-2B
Temperature Adjust Range100-180°C
Mounting SpecificationΦ22mm × 15mm,or Φ30mm × 15mm,or Φ45mm × 18mm
Power Source 220V,50Hz
Power Consumption650W
Overall Dimension 340  × 270 × 400 mm
Machine Weight33kg
Operation EnvironmentAltitude is required as no more than 1000m,temperature around less than 40 °C , higher than -10 °C,relative humidity less than 85%RH (with temperature 20°C),Away from obvious vibration;No conductive dust,explosion gas and corrosion air which can strongly damage metal and resistance. 

2. Model :LT-HXQ-50

GENERAL INTRODUCTIONLD-HXQ-50.jpg

Designed with water- in/output cooling function ;

Applied for thermal mounting for various materials;

After setting parameters like heating temperature, temperature duration time and pressure etc. ,it can automatically finish mounting work, no need operators monitoring. 

kinds of modes available according to different specimens, and two same specification specimen can be mounted simultaneously, makes mounting work more efficiency . 

TECHNICAL PARAMETERS

Machine Name Thermal Metallographic Mounting Machine
Machine ModelLT-HXQ-50
Mode Specification Φ25mmΦ30mmΦ40mmΦ50mm
Temperature30-180°C
Pressure 10-2000KPa
Temp.Holding Time1-900min
Cooling MethodAuto stop cooling when temperature cooling to 50°C
Power Source 220V
Power Consumption 1000W
Overall Dimension 600 × 490 × 550mm
Gross Weight100kg

3. Model :LT-CXQ-2500

GENERAL INTRODUCTIONLT-CXQ-2500.jpg

Vacuum Metallographic Mounting Machine is widely applied for various cool mounting process, especially for specimens such as PCB as well as material with micro hole. In modern industry, it often be mixed with coloring agent to detect and verify defective for specimens. 

This metallographic mounting employs the principle of extract air from hole, then inject coloring agent into micro hole assisted by air pressure. 

TECHNICAL PARAMETERS

Machine NameVaccum Metallographic Mounting Machine
Machine Model LT-CXQ-2500
Vacuum Rate -0.08MPa
Rotating Plate Φ205mm
Overall Dimension Φ280mm×330mm


4. Model : LT- ZXQ-2

GENERAL INTRODUCTIONLT-ZXQ-2.jpg

Automatic Metallographic Mounting Machine is an advanced metallic specimen mounting equipment, which can implement full-control to full metallographic mounting process, and is available to carry out an one-stop control heating, pressurizing, overloading protection, cooling, unloading.

This automatic metallographic mounting machine enable the software system solidafication and is widely applied for thermo materials such as urea-formaldehyde molding powder.

This automatic metallographic mounting machine is designed as multiple head, easy to replace steel die sleeve and available for mounting size such as φ30.

TECHNICAL PARAMETERS

Machine Name Automatic Metallographic Mounting Machine
Machine ModelLT- ZXQ-2
Test specimen Mounting Size ф30mm
Heater650W220V
Power Consumption 1000W
Frequency Converter300W
Overall Dimension 380×350×420mm
Net Weight 50Kg





DONG GUAN LMET TEST TECHNOLOGY CO.,LTD